The Kinetis^® KE04 MCU family delivers a next-generation solution with enhanced ESD/EMC performance for cost-sensitive, high-reliability device applications used in high electrical noise environments.

Offers a cost-effective 32-bit solution featuring low power and high robustness
Provides a pin-compatibility within the Kinetis E series portfolio, as well as pin compatibility with our 8-bit S08P family
Includes a powerful array of analog, communication and timing, and control peripherals with varying flash memory size and pin count

データ・シート

リファレンス・マニュアル

製品詳細

ブロック図

KE0xZ MCU Family

図を取得する PDF

Features

Operating characteristics

Voltage range: 2.7 to 5.5 V
Flash write voltage range: 2.7 to 5.5 V
Temperature range (ambient): -40 to 105°C

Performance

Up to 48 MHz Arm^{^®} Cortex^®-M0+ core
Single cycle 32-bit x 32-bit multiplier
Single cycle I/O access port

Memories and memory interfaces

Up to 128 KB flash
Up to 256 B EEPROM
Up to 4 KB RAM

Clocks

Oscillator (OSC) - loop-controlled Pierce oscillator, crystal or ceramic resonator range of 31.25 kHz to 39.0625 kHz or 4 MHz to 20 MHz
Internal clock source (ICS) - internal FLL with internal or external reference, precision trimming of internal reference allowing 1% deviation across temperature range of 0 °C to 70 °C and 1.5% deviation across temperature range of -40 °C to 105 °C, up to 20 MHz
Internal 1 kHz low-power oscillator (LPO)

System peripherals

Power management module (PMC) with three power modes: run, wait, stop
Low-voltage detection (LVD) with reset or interrupt, selectable trip points
Watchdog with independent clock source (WDOG)
Programmable cyclic redundancy check module (CRC)
Serial wire debug interface (SWD)
Bit manipulation engine (BME)

Security and integrity modules

64-bit unique identification (ID) number per chip

Human-machine interface

Up to 57 general-purpose input/output (GPIO)
Two 8-bit keyboard interrupt modules (KBI)

Analog modules

One 16-channel 12-bit SAR ADC with internal band gap reference channel, operation in Stop mode, optional hardware trigger (ADC)
Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)

Timers

One 6-channel FlexTimer/PWM (FTM)
Two 2-channel FlexTimer/PWM (FTM)
One 2-channel periodic interrupt timer (PIT)
One real-time clock (RTC)
One pulse-width timer (PWT)
One fast timer

KE06

アクティブ

類似

Kinetis^® KE06-48 MHz, Mainstream with CAN Microcontrollers (MCUs) based on Arm^® Cortex^®-M0+ Core

データ・シート:
PDF

KE02_40

アクティブ

類似

Kinetis^® KE02-40 MHz, Entry-Level Microcontrollers (MCUs) based on Arm^® Cortex^® -M0+ Core

データ・シート:
PDF

KE1xZ

アクティブ

類似

KE1xZ: Arm® Cortex®-M0+ 5V Main Stream MCU with NXP Touch and CAN Control

データ・シート:
PDF

MCX-A13X-A14X-A15X

アクティブ

類似

MCX A14x/15x MCU：Arm^® Cortex^® M33、拡張性の高いデバイス・オプション、低消費電力でインテリジェントなペリフェラルを搭載

データ・シート:
PDF

購入/パラメータ

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

設計・リソース

デザイン・ファイル

クイック・リファレンス設計・ファイルの種類.

1 設計・ファイル

完全な内訳を受け取ります。 製品の設置面積などについては、 eCad ファイル.

シンボルおよびフットプリント
Kinetis^® Symbols, Footprints and Models

INTERNAL改訂 1.0Nov 27, 2017 11:23:001 KBCAD-SYMBOLFOOTPRINTS

ダウンロード

ハードウェア

クイック・リファレンスボードタイプ.

1-5 件/全 11 ハードウェア提供

評価・開発ボード
FRDM Development Platform for Kinetis^® KE06 MCUs注目
アクティブ

FRDM-KE06Z
評価・開発ボード
NXP FRDM Development Platform for Kinetis^® KE04 MCUs注目

FRDM-KE04Z
エミュレータ、プローブ、プログラマ
Universal Multilink開発インターフェース
アクティブ

UMultilink
追加ハードウェアを利用可能パートナー・ソリューションの特集を表示.
エミュレータ、プローブ、プログラマ
MCU-Link Debug Probe
アクティブ

MCU-LINK
エミュレータ、プローブ、プログラマ
LPC-Link2
アクティブ

OM13054
エミュレータ、プローブ、プログラマ
Universal Multilink FX高速開発インターフェース
アクティブ

U-MULTILINK-FX
エミュレータ、プローブ、プログラマ
PEmicro Cyclone programmer
アクティブ

CYCLONE
エミュレータ、プローブ、プログラマ
PEmicro Cyclone FX programmer

CYCLONE-FX
エミュレータ、プローブ、プログラマ
MCU-Link Pro Debug Probe
アクティブ

MCU-LINK-PRO
評価・開発ボード
MPC560x Calibration, Debug and Interface Boards
アクティブ

MPC560xBOARDS
評価・開発ボード
MCU-LINK-MR Debug Probe with USB-C, Serial and Mobile Robotics Interfaces
アクティブ

MCU-LINK-MR

全て表示

1-5 件/全 24 ハードウェア提供

エミュレータ、プローブ、プログラマ
J-Link PLUS

JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in t...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
Flasher Secure

Flasher Secure is a mass production programming system, capable of protecting the vendor’s IP regardless of the production site. It provides full control over the program...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
J-Link BASE

Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other ...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
Flasher Compact

Flasher Compact is the compact twin to the Flasher PRO, primarily designed for installation into production rigs or automated test equipment (ATE) where production space ...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
Flasher Hub-4NEW

SEGGER’s Flasher Hub-4 controls multiple Flasher Compacts (up to 24 via USB hubs) serving as individual channels for parallel, high-speed gang programming. Each channel c...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
Flasher ARM

In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
Flasher Hub-12

The Flasher Hub-12 controls up to 12 Flasher Compacts so that they program simultaneously, creating a powerful gang programmer for efficient high-speed parallel programmi...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
J-Trace PRO Cortex-M

J-Trace PRO for Cortex-M enables continuous streaming trace, lifting the limitations by internal buffers and slow data transmission to give the insights you need to optim...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
J-Link ULTRA+

The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Brea...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
Flasher Portable PLUS

Flasher Portable PLUS is an extremely portable flash programmer, specifically designed to meet the needs of production-grade flash programming in the field.

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
J-Link PRO PoE

J-Link PRO PoE is a specialized programming / debug probe for creating test farms. It can draw power via Ethernet and supplies power to the target either via debug interf...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
J-Trace PRO Cortex

J-Trace PRO Cortex provides support for Cortex-A/R/M based microcontrollers. The SuperSpeed USB 3.0 interface enables continuous streaming trace via USB with the full tra...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
J-Link PRO

J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This ...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
J-Link WiFi

JTAG/SWD debug probe with WiFi interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs.

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
Flasher ATE2

Flasher ATE2 is a robust single-board gang programmer with eight independent programming channels. It is designed for high-volume, automated production environments, part...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
J-Link EDU Mini

The J-Link EDU Mini is a stripped-down, budget-friendly model of the J-Link debug probe created for educational use. Even with its reduced size, it maintains most J-Link ...

By SEGGER Microcontroller GmbH Gold パートナー
エミュレータ、プローブ、プログラマ
Flasher PRO

Flasher PRO is SEGGER’s “almost-anything” flash programmer for microcontrollers, SoCs, and (Q)SPI flashes.

By SEGGER Microcontroller GmbH Gold パートナー
テストアクセサリ、デバッガ
Multilink Debug Probes

Multilink debug probes are BDM/JTAG debug probes for various NXP devices. Universal models support SWO debug in NXP's MCUXpresso IDE. FX model features high-speed com...

By P & E Microcomputer Systems, Inc Gold パートナー
テストアクセサリ、デバッガ
I-jet

I-jet is a high-performing in-circuit debugging probe for ARM. It is capable of delivering power to the target board and measuring target power consumption. I-jet is full...

By IAR Platinum パートナー
テストアクセサリ、デバッガ
Cyclone Production Programmers

Programmer for stand-alone (or cloud-connected) in-circuit flash programming, debug, & test of many NXP MCUs. Sophisticated power mgmt & dynamic data. FX line off...

By P & E Microcomputer Systems, Inc Gold パートナー
テストアクセサリ、デバッガ
TRACE32® Debug and Trace tools for Arm®-based NXP MPUs/MCUs

TRACE32® provides a complete suite of tools for all NXP's Arm®-based microprocessors. All of these provide unparalleled levels of debug capabilities to get the best o...

By Lauterbach GmbH Gold パートナー
テストアクセサリ、デバッガ
Green Hills Probe

High speed on-chip download, run control and trace.

By Green Hills Software Platinum パートナー
テストアクセサリ、デバッガ
TRACE32® CombiProbe 2 Compact Trace for NXP Microcontrollers

CombiProbe 2 enables full insight into what an embedded system is doing at run-time. Besides its comprehensive debug capabilities, the trace simplifies system profiling o...

By Lauterbach GmbH Gold パートナー
テストアクセサリ、デバッガ
TRACE32® PowerDebug System for NXP Microcontrollers/Microprocessors

PowerDebug is Lauterbach's powerful, modular, flexible debug system. It provides the broadest coverage of supported chips and core architectures in the embedded i...

By Lauterbach GmbH Gold パートナー