Low-Ohmic Four-Pole Double-Throw Analog Switch
NX3DV2567 アラートの受信
The NX3DV2567 is a four-pole double-throw analog switch (4PDT) optimized for switching WLAN-SIM supply, data and control signals. It has one digital select input (S) and four switches each with two independent input/outputs (nY0 and nY1) and a common input/output (nZ). Schmitt trigger action at S makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 1.4 V to 4.3 V.
A low input voltage threshold allows pin S to be driven by lower level logic signals without significant increase in supply current ICC. This makes it possible for the NX3DV2567 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation.
The NX3DV2567 allows signals with amplitude up to VCC to be transmitted from nZ to nY0 or nY1; or from nY0 or nY1 to nZ.
製品詳細
Features
Supply Voltage
- 1.4 V to 4.3 V
Low ON Resistance for Supply Path
- 0.5Ω(typical) at VCC = 1.8 V
- 0.45Ω(typical) at VCC = 2.7 V
Low ON Resistance for Data Path
- 7Ω(typical) at VCC = 1.8 V
- 6Ω(typical) at VCC = 2.7 V
Key Features
- Low ON capacitance for data path
- Wide -3 db bandwidth > 160 MHz
- Break-before-make switching
- High noise immunity
- CMOS low-power consumption
- Latch-up performance exceeds 100 mA per JESD 78B Class II Level A
- 1.8 V control logic at VCC = 3.6 V
- Control input accepts voltages above supply voltage
- Very low supply current, even when input is below VCC
- High current handling capability (350 mA continuous current under 3.3 V supply for supply path switch)
- Specified from -40°C to +85°C and from -40°C to +125°C
ESD Protection
- HBM JESD22-A114F Class 3A exceeds 4000 V
- HBM JESD22-A114F Class 3A I/O to GND exceeds 7000 V
- CDM AEC-Q100-011 revision B exceeds 1000 V
Product Longevity Program
- This product is included in the NXP Product Longevity Program ensuring a stable supply of products for your embedded designs. The NX3DV2567GU,115 is included in the 15-year program
設計・リソース
エンジニアリング・サービス
NXPから直接サポートを受けるには、以下のサイトをご覧ください。 エンジニアリング・サービス.
2 エンジニアリング・サービス
-
インディペンデントデザインハウス (IDH)
Hardware Design Services
-
インディペンデントデザインハウス (IDH)
Embedded Software Design
本製品をサポートするパートナーの一覧は、 パートナーマーケットプレイス.