Related Hardware
クイック・リファレンス ボードタイプ.
2 ハードウェア提供
-
評価・開発ボードMCX A14x/A15x MCU用FRDM開発ボード
アクティブ -
リファレンス・デザインNXP CoreRide Z248ゾーン・リファレンス・システム
製造開始前
FS2530 Safety SBC Evaluation Board
KITFS2530EVM is an evaluation board for the FS253x power management-integrated circuit (PMIC), enabling device configuration, evaluation and OTP register programming. The KITFS2530EVM integrates all required hardware to evaluate FS253x devices and includes a communication bridge based on the FRDM-MCXA153 development platform for connection to the FS25 GUI software. The KITFS2530EVM supports functional evaluation of FS253x configurations before final One-Time Programmable (OTP) programming, making it suitable for development, validation and preproduction testing.
製品詳細
Features
Connectivity
- FRDM-MCXA153 MCU plugged allows USB connection for easy connection to software GUI (access to I²C bus, IOs, Safety outputs, Debug, ADC, regulators) USB connection for register access, OTP emulation and programming.
Power management
- VBAT power supply connectors (Jack and Phoenix, 40 V max)
- VPRE output 3.2 V to 5.1 V up to 10 A
- LVBUCK1/2/3 output 0.5 V to 3.3 V up to 3.5 A (Single/Multiphase)
- LVBUCK4/5 output 0.5 V to 3.3 V up to 1.2 A (Single)
- LDO1 and LDO2, from 1.0 V to 3.3 V up to 400 mA
- VREF for external ADC reference from 1.2 V to 4.096 V up to 400 mA
General Specifications
- Battery switch protection
- Integrated 10-bits analog digital converter (ADC)
- General-purpose input/output (GPIOs)
- Fault collection and control unit (FCCU)
- FS0B/RSTB/LIMP safety pins
Support
- Debug mode access Manual
- Automated OTP fuse programming
- Connectors allowing easy access to digital signals
- Allows easy configuration of boost front-end and back-end power topologies
Components
- LEDs that indicate signal or regulator status.
設計・リソース
ソフトウェア
クイック・リファレンス ソフトウェア・タイプ.
1 ソフトウェア・ファイル
-
デバッグと可視化ツール
LinkServer for Microcontrollers
注: より快適にご利用いただくために、ソフトウェアのダウンロードはデスクトップで行うことを推奨します。