Getting Started for ASL5115EVBMST

2.1 Board overview

The ASL5115EVBMST evaluation board features a ASL5x15SHN IC, a highly integrated and flexible Matrix LED Controller (MLC). The kit is designed to drive 12 LEDs or segments with up to 1.5 A max. current. In a default application, a microprocessor unit (MCU) controls the devices through a Controller Area Network (CAN) interface. The MCU controls the dimming profiles of each individual channel. The ASL5x15SHN also feature several diagnostic readings to allow a detection of errors in the system. A maximum of 9 follower boards can hang from a single leader board.

2.2 Board features

The ASL5115EVBMST board features include:

• Control of one ASL5x15SHN Matrix LED Controller (MLC)
• Option to control any NXP ASL5xxxyHN Matrix LED Controller (HVQFN part numbers). All part numbers are pin to pin compatible.
• Interface connector to the S32K144EVB-Q100, through CAN protocol communication (only available in leader EVB)
• Power supply connector (+12 V and GND). Combined with the S32K144EVB-Q100 interface (only available in leader EVB)
• Interface connector to a single or multiple LED boards
• Dip switch to select device address in CAN bus
• Interface connector to hang a Follower board (see boards overview section)
• Interface connector to connect to a leader board or other follower board (only available in follower EVB).

2.3 Board image

Important components on the ASL5115EVBMST

(figure – aaa-033929)

2.4 Accessory boards

The leader board is populated with one UJA1163 System Basic Chip (SBC) IC, to enable the communication with the microcontroller or Vector CANoe through CAN (FD) protocol, and to supply the MLC populated in the same board, together with the MLCs populated in the follower boards hanging from the leader board. A maximum of 9 follower boards can hang from a single leader board.

(figure aaa-033928)
Figure identifies important components on the ASL5x15EVBSLAV

Example of connection between a leader board and a follower board. Up to 9 follower boards can hang from a single Leader board.

(figure aaa-000000)

2.5 S32K144EVBQ100 Evaluation board

The ASL5115EVBMST is compatible with the S32K144EVBQ100. The S32K144EVB-Q100 provides the control signals (through CAN (FD) communication) for the ASL5x15SHN devices. When used with the GUI, the S32K144EVBQ100 drives the channels in the way as selected on the GUI. The S32K144EVB-Q100 can also be used as a system processor to create standalone applications or prototype systems.

2.6 ASL45XASLX41 - Multichannel LED driver system Evaluation Board

The ASLx500SHN and ASLx41xSHN Evaluation Board (EVB) features the ASL4500SHN, a highly integrated and flexible four-phase DC-to-DC boost converter IC and two ASL3416SHN, a three-channel buck mode LED driver IC delivering constant average DC current. The kit is designed to drive six LED strings with 150 mA to 1.6 A and 2 V to 60 V LED string voltage. In a default application a microprocessor unit (MCU) controls the devices through a serial peripheral interface (SPI).

The ASL5x15EVBMST is only connected to the CAN physical bus of the S32K144EVBQ100 and to the LEDs. The ASL5x15EVBMST EVB is not directly connected to the ASL45XASLX41. More information on the connection of the ASL45XASLX41 EVB can be found in the ASL45XASLX41 User guide (NDA required).

(Fig 6 UM11224 aaa030853)

2.7 Additional board support

Board block diagram, board description, test points and additional board descriptions and images are available in the User Guide. Refer to UM11224- ASL5x15 Evaluation Boards - User Guide [English]

3.1 Hardware Configuration

A full system configuration is completed with the ASL5115EVBMST wired with cable harness for power supply and CAN (FD) communication to the S32K144EVBQ100 associated by the connectors on the ASL45XASLX41 Multichannel LED board. Can also be configured with up to 9 follower boards not shown. Customer can configure using their own LED board.

(Fig aaa-033933)

3.2 Configuration image

To start working with the ASL5x15EVB, the following connections and setup must be performed:

1. Connect the ASL5115EVBMST to the S32K144EVB. Do not forget to supply S32K144EVB-Q100 with 12 V, to enable the CAN communication through the SBC.
2. With power turned off, attach S32K144EVB-Q100 12 V DC power supply to ASL5115EVBMST’s supply terminals.
3. Attach an LED board (example shown in image) to the ASL5115EVBMST. Additionally, if there is one or several follower EVB in the system, create a chain with the leader board using connectors X1 and X3.
4. (Optional) If using the optional ASL45XASLX41 EVB: attach the S32K144EVBQ100 to ASL45XASLX41 and supply the LED boards with any of the available buck outputs.
5. Plug the USB cable from the mini connector end into the S32K144EVB-Q100.
6. Plug the USB cable standard connector end into the computer.
7. Turn on the power supply. The supply indicator LED (Red LED in ASL5x15EVBMST) (Green LED3 and LED4 in ASL45XASLX41) shall light up.
8. (Optional) Use GUI to drive all the evaluation boards (S32K144EVB-Q100, ASL45XASLX41 and all MLC's evaluation boards)
9. (Optional) Use Vector CANoe software to drive MLC's evaluation boards
10. (Optional) Use your own software, microcontroller and LED driver module to evaluate the NXP's Matrix LED Controller using its EVB.

3.3 Additional ASL5115EVBMST board support

For detailed configuration and connection instructions refer to the images in the UM11224- ASL5x15 Evaluation Boards - User Guide [English]

4.1 Preparing graphical user interface operating environment

There are several steps to follow for the full system configuration using the ASL5115EVBMST ASL5115EVBSLAV, S32K144EVB-Q100, and the ASL45XASLX41 evaluation boards.

4.2 Downloading and flashing the S32K144EVB-Q100

To download and install the latest version of the S32K144EVB-Q100 software:

1. Go to http://www.nxp.com/ASL45XASLX41.
2. Go to the Get Started section and download the Software and Design files (NDA required)
3. Unzip the files to your computer.

Flash the S32K144EVB-Q100:

1. Connect the S32K144EVB-Q100 to your PC with a micro USB cable.
2. The S32K144EVB-Q100 is shown as a USB drive.
3. Copy the flash image (*.srec) file from the one downloaded and unzipped before to the root directory of the S32K144EVB-Q100 USB drive.
4. The copy process will take about one minute. Once completed, the S32K144EVBQ100 is flashed and is ready to be used with the GUI, the ASL5x15EVBMST, ASL5x15EVBSLAV and the ASL45XASLX41.

4.3 Launching the GUI on your computer

The GUI provides easy control of all ASL5x15 EVB and ASL45XASLX41 EVB. To launch the GUI:

Note: The GUI can be found in DocStore, in the following path: LED drivers and controllers / Evaluation boards / ASL45XASLX41 EVB / GUI for ASL45XASLX41 EVB

1. Locate the GUI folder where you unzipped the GUI.
2. Start the GUI by calling the executable (*.exe) file.
3. The GUI opens with the startup window.

The GUI is divided into several pages. Each page gives some control options to the user.

The GUI will always start up with the Setup page.

(Fig 8 aaa-030864)

4.4 Complete step by step

Complete step by step software and hardware instructions are detailed in the UM11224 - ASL5x15 Evaluation Boards - User Guide [English].

Additionally, enabling instructions are available on the S32K144EVB tool summary page.

Success

Now start your embedded application development.

5.1 Product summary page

www.nxp.com/ASL5xxxyHz: Smart Matrix LED Controller for Automotive Lighting.

5.2 Tool summary page

The overview tab provides an overview of the device, product features, a description of the kit contents, a list of (and links to) supported devices, list of (and links to) any related products and a Get Started section.

• Documentation: download current documentation
• Software and Tools: download current hardware and software tools / Drivers
• Buy/Parametrics: purchase the product and view the product parametrics
• Build package: the bill of materials (BOM) and supporting schematics are also available for download in the Get Started section.

After downloading files, review each file, including the user guide which includes setup instructions.

5.3 For the entire solution

In addition to our ASL5xxxyHzx family Smart Matrix LED Controller for Automotive Lighting devices you may also want to visit:

• Product pages:
  • S32K: 32-bit Automotive General-Purpose Microcontrollers page
  • ASL341ySHN: Three-channel Automotive LED Buck Driver
  • ASL241ySHN: Two-channel Automotive LED Buck Driver
  • ASL250ySHN: Two-Phase Automotive LED Boost Driver with a Limp Home mode
  • ASL4500SHN: Four-Phase Automotive LED Boost Driver
  • ASL150ySHN: Single-Phase Automotive LED Boost Driver with Limp Home mode
• Tool pages
  • S32K144EVB S32K144 Evaluation Board
  • ASL45XASLX41: Multichannel LED driver system
• Support pages
  • S32 Design Studio IDE
• Hardwre pages
  • Analog Toolbox
• Software pages
  • Analog Expert Software and Tools

Chip Documents

ASL5xxxyHz, Matrix LED Controller (MLC) – Product Brief UM11224