HDMI/DVI Level Shifter with Dongle Detect Support and Active DDC Buffer

画像にカーソルを合わせると拡大表示されます。

製品詳細

Features

General Features

  • Power supply 3.3 V +- 10 pct
  • ESD resilience to 7 kV HBM, 1 kV CDM
  • Support for optional HDMI dongle detection via DDC/I²C-bus channel
  • Power-saving modes (using output enable)
  • Back-current-safe design on all sink-side main link, DDC and HPD terminals
  • Transparent operation: no re-timing or software configuration required
  • DisplayPort to HDMI adapters (must enable DDET)
  • DisplayPort to DVI adapters required to drive long cables

High-speed TMDS Level Shifting

  • Converts four lanes of low-swing AC-coupled differential input signals to DVI v1.0 and HDMI v1.3a compliant open-drain current-steering differential output signals
  • Pin-programmable pre-emphasis feature
  • TMDS level shifting operation up to 1.65 Gbit/s per lane (165 MHz character clock)
  • TMDS level shifting operation up to 2.25 Gbit/s per lane (225 MHz character clock) using pre-emphasis feature
  • Integrated 50 Ω termination resistors for self-biasing differential inputs
  • Back-current safe outputs to disallow current when device power is off and monitor is on
  • Disable feature to turn off TMDS inputs and outputs and to enter low-power state

DDC Level Shifting

  • Integrated active DDC buffering and level shifting (3.3 V source to 5 V sink side)
  • Rise time accelerator on sink-side DDC ports
  • 0 Hz to 400 kHz I²C-bus clock frequency
  • Back-power safe sink-side terminals to disallow backdrive current when power is off or when DDC is not enabled

HDMI Dongle Detect Support

  • Incorporates I²C target ROM
  • Responds to DDC read to address 81h with predetermined byte sequence
  • Feature enabled by pin DDET (must be enabled for correct operation in accordance with DisplayPort interoperability guideline)

HPD Level Shifting

  • HPD non-inverting level shift from 0 V on the sink side to 0 V on the source side, or from 5 V on the sink side to 3.3 V on the source side
  • Integrated 200 kΩ pull-down resistor on HPD sink input guarantees 'input LOW' when no display is plugged in
  • Back-power safe design on HPD_SINK to disallow backdrive current when power is off

部品番号: PTN3361BBS.

購入/パラメータ










































































































ドキュメント

クイック・リファレンス ドキュメンテーションの種類.

4 ドキュメント

デザイン・ファイル

サポート

お困りのことは何ですか??