USB Type-C SuperSpeed Active Switch
PTN36043A アラートの受信
PTN36043A is a very small, low power 2 differential channel 2 to 1 active multiplex/demultiplexer switch with integrated SuperSpeed USB 3.1 Gen 1 (also known as USB 3.0) redriver IC that can switch two differential signals to one of two locations. The active switch has optimized performance with minimized crosstalk, as required by the high-speed serial interface for USB Type-C connector. PTN36043A allows expansion of existing high-speed ports for very low power consumption.
With integrated USB 3.1 Gen 1 redriver, signal quality is enhanced by performing receive equalization on the deteriorated input signal followed by transmit de-emphasis maximizing system link performance. With its superior differential signal conditioning and enhancement capability, the device delivers significant flexibility and performance scaling for various systems with different PCB characteristics and cable channel conditions and still benefit from optimum power consumption.
PTN36043A has built-in advanced power management capability that enables significant power savings under various different USB 3.1 Gen 1 Low-power modes (U2/U3). It can detect link electrical conditions and can dynamically activate/de-activate internal circuitry and logic. The device performs these actions without host software intervention and conserves power.
PTN36043A is powered from a 1.8 V supply and is available in a small DHX2QFN18 package (2.4 mm x 2.0 mm x 0.35 mm) with 0.4 mm pitch.
製品詳細
Features
Key Features
- 2 bidirectional differential channel, 2 : 1 multiplex/demultiplexer switch, supports USB 3.1 Gen 1 specification (SuperSpeed only)
- Compliant to SuperSpeed USB 3.1 Gen 1 standard
- Pinout data flow matches USB Type-C connector pin assignments
- Integrated termination resistors provide impedance matching on both transmit and receive sides
- Automatic receiver termination detection
- Flow-through pinout to ease PCB layout and minimize crosstalk effects
- Compliant with JESD 78 Class II latch up test standard
Control Pins
- Two control pins for each channel to select optimized signal conditions
- Receive equalization on each channel to recover from InterSymbol Interference (ISI) and high-frequency losses, with provision to choose equalization gain settings per channel
- Transmit de-emphasis on each channel delivers pre-compensation suited to channel conditions
- Output swing adjustment
Low Active Power
- 203 mW/113 mA (typical) for VDD = 1.8 V
Power-Saving States
- 1.35 mW/0.75 mA (typical) when in U2/U3 states
- 0.81 mW/0.45 mA (typical) when no connection detected
Differential and Common Return Loss Performance
- 14 dB differential and 15 dB common-mode return loss for 10 MHz to 1250 MHz
Power Supply
- VDD = 1.8 V (typical)
Power Supply
- VDD = 1.8 V (typical)
Package
- DHX2QFN18 package: 2.4 mm x 2.0 mm x 0.35 mm, 0.4 mm pitch
ESD Protection
- Exceeds 7000 V HBM per JDS-001-2012 and 1000 V CDM per JESD22-C101
Latch-Up Testing
- Done to JEDEC Standard JESD78 which exceeds 100 mA
Operating Temperature Range
- -40 °C to +85 °C
Product Longevity Program
- This product is included in the NXP Product Longevity Program ensuring a stable supply of products for your embedded designs. The PTN36043ABX is included in the 15-year program.
