‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

32-bit MCU for Auto Powertrain Applications

製品詳細

ブロック図

MPC5567 Microcontroller

Features

Our e200z6 Core

Memory

System

I/O

Development Tools

Product Programs

Product Longevity

アプリケーション

インダストリアル

オートモーティブ

購入/パラメータ

ドキュメント

絞り込み

アプリケーション・ノート (63)

AN4731: Understanding Injection Current on NXP Automotive Microcontrollers – Application Note[AN4731]

AN4868: EEPROM Emulation with MPC55xx, MPC56xx, and MPC57xx Microcontrollers – Application Note[AN4868]

AN4907: Engine Control eTPU Library – Application Note[AN4907]

AN5233: Isolator Board for In-Circuit Debugging and Programming tools – Application Note[AN5233]

AN5200: Error-Correcting Codes Implemented on MPC55xx and MPC56xx – Application Note[AN5200]

AN2864: General C Functions for the eTPU – Application Note[AN2864]

AN4756: eTPU2 Time Base Running at Full Speed – Application Note[AN4756]

AN2613, NXP® MPC5500 Minimum Board Requirements - Application Notes[AN2613]

AN4674: MPC5xxx Boot Assist Module Application – Application Note[AN4674]

PMSM electrical parameters measurement[AN4680]

Using the Analog Sensing for AC Motors (ASAC) eTPU Function[AN2970]

Using the AC Motor Control eTPU Function Set (set4)[AN2968]

AN2972, Using the PMSM Vector Control eTPU Function - Application Notes[AN2972]

Permanent Magnet Synchronous Motor Vector Control, Driven by eTPU on MPC5500[AN3206]

Using the Speed Controller (SC) eTPU Function[AN2843]

AN4480, Permanent Magnet Synchronous Motor with Resolver, Vector Control, Driven by eTPU on MPC5500 - Application Notes[AN4480]

A Guide to Transitioning from the MPC556x to the MPC5644A[AN4113]

MPC5500: A Decimation Solution with Zero CPU Loading[AN3396]

AN4088: MPC5500/MPC5600 Nexus Support Overview – Application Note[AN4088]

AN4147: Tips and Tricks with DMA on MPC56xx – Application Note[AN4147]

AN2865: MPC5500 and MPC5600 MCUs Simple Cookbook – Application Note[AN2865]

MPC553x, MPC555x, and MPC556x Family Nexus Interface Connector[AN2614]

Design, Accuracy, and Calibration of Analog to Digital Converters on the MPC5500 Family[AN2989]

AN2854, Using the Synchronized Pulse-Width Modulation eTPU Function - Application Notes[AN2854]

Programming the eTPU[AN2848]

Improving DSP Performance Using Efficient SPE Coding[AN3733]

Pad Configuration and GPIO Driver for MPC5500[AN2855]

AN2849, Using the eTPU Pulse Width Modulation (PWM) Function - Application Notes[AN2849]

Period and Pulse Accumulator (PPA) eTPU Function[AN2858]

MPC5500 Multi-module Demo: Frequency Detection[AN3524]

Software files for AN3524[AN3524SW]

AN2851, Using the eTPU Input Capture Function - Application Notes[AN2851]

eTPU Host Interface[AN2821]

Implementing an FIR Filter on the MPC55xx[AN3509]

Using the CEA709 eTPU Function[AN3379]

Enhanced Table Lookup Performance: Using the MPC5500 Signal Processing Engine (SPE)[AN3288]

AN3283, MPC5500 Flash Programming Through Nexus/JTAG - Application Notes[AN3283]

AC Induction Motor Volts per Hertz Control, Driven by eTPU on MCF523x[AN3000]

AC Induction Motor Vector Control, Driven by eTPU on MPC5500[AN3001]

AC Induction Motor Volts per Hertz Control with Speed Closed Loop, Driven by eTPU on MPC5500[AN3205]

BLDC Motor with Speed Closed Loop and DC-Bus Break Controller, driven by eTPU on MPC5554[AN3007]

DC Motor with Speed and Current Closed Loops, Driven by eTPU on MPC5554[AN3008]

BLDC Motor with Hall Sensors and Speed Closed Loop, driven by eTPU on MPC5554[AN3006]

AN2958, Using the DC Motor Control eTPU Function Set (set3) - Application Notes[AN2958]

AN3005, BLDC Motor with Quadrature Encoder and Speed Closed Loop, Driven by eTPU on MPC5554 - Application Notes[AN3005]

Using the ACIM Volts per Hertz (ACIMVHZ) eTPU Function[AN2971]

Interfacing MPC55xx Microcontrollers to the MFR4200 FlexRay Controller[AN3215]

EMC Guidelines for MPC5500-Based Systems[AN2706]

Permanent Magnet Synchonous Motor Vector Control, Driven by eTPU on MCF523x[AN3002]

Three 3-Phase BLDC Motors with Speed Closed Loop, driven by eTPU on MCF523x[AN2948]

Signal Integrity Considerations with MPC5500-based systems[AN2705]

BLDC Motor with Speed Closed Loop and DC-Bus Break Controller, driven by eTPU on MCF523x[AN2954]

DC Motor with Speed and Current Closed Loops, driven by eTPU on MCF523x[AN2955]

BLDC Motor with Quadrature Encoder and Speed Closed Loop, Driven by eTPU on MCF523x[AN2957]

AN2850, Using the General Purpose Input/Output (GPIO) eTPU Function - Application Notes[AN2850]

MPC5500 Watchdog Timer - Configuration and Operation[AN2817]

Using the Output Compare (OC) eTPU Function[AN2852]

3-Phase BLDC Motor with Speed Closed Loop, driven by eTPU on MCF523x[AN2892]

Using the Current Controller (CC) eTPU Function[AN2844]

Using the Break Controller (BC) eTPU Function[AN2845]

Using the DC Motor Control PWM eTPU Functions[AN2840]

AN2613, NXP^® MPC5500 Minimum Board Requirements - Application Notes[AN2613]