Getting Started with the S32K3X4EVB-T172 Evaluation Board for Automotive General Purpose

最終更新日時： 2023-03-09 17:34:00サポート S32K3X4EVB-T172 車載汎用評価ボード

このドキュメントの内容

1
Out of the Box
2
Get Software
3
Plug It In
4
Build

Design Resources
Support

お客様の S32K3X4EVB-T172 車載汎用評価ボード

このドキュメントの内容

1. Out of the Box

Note: The +12 V power supply and micro USB cable are not part of the package. The +12 V connector is a center-positive barrel type with outer 5.5 mm and inner 2.1 mm diameter.

1.1 Get to Know the S32K3X4EVB-T172 Evaluation Board

S32K3X4EVB-T172-Callouts-204

完了としてマーク：1.1 Get to Know the S32K3X4EVB-T172 Evaluation Board

1.2 Block Diagram Features

S32K3X4EVB-T172 Evaluation Board

完了としてマーク：1.2 Block Diagram Features

次へGet Software

2. Get Software

You can watch the video or follow the below step-by-step guide to set up your S32K3X4EVB-T172 Evaluation Board:

2.1 Get the Integrated Development Environment (IDE)

Download and install S32 Design Studio IDE for S32 Platform.

Note: You will receive activation code through email.

DOWNLOAD S32 DESIGN STUDIO IDE

完了としてマーク：2.1 Get the Integrated Development Environment (IDE)

2.2 Install the S32K3xx Development Package

Go to Help → S32DS Extensions and Updates from the top menu to open the S32DS Extensions and Updates. Navigate to the S32K3xx development package and install it.

Note: In case of installation issues, please ensure that the latest version of S32 Design Studio Platform package and S32 Design Studio Platform Tools package is installed.

Continue with the installation of the S32K3 Real-Time Drivers.

完了としてマーク：2.2 Install the S32K3xx Development Package

2.3 Download and Install Elektrobit tresos Studio and Real-Time Drivers (Only AUTOSAR Users)

Download and install Elektrobit Tresos Studio / AUTOSAR Configuration Tool from S32K3 Standard Software Package.

Download and install the .exe file of the S32K3 Real-Time Drivers for Cortex-M from the S32K3 Standard Software Package.

The installer will ask for the EB tresos installation directory on your disk, saving time in configuration.

Note: You will receive an activation code via email. If you installed RTD prior to EB tresos, create a SW32K3_RTD_4.4_x.y.z.link file in: C:\EB\tresos\links folder with the content: "path=C:/NXP/SW32K3_RTD_4.4_x.y.z", where x,y,z refers to installed RTD version.

完了としてマーク：2.3 Download and Install Elektrobit tresos Studio and Real-Time Drivers (Only AUTOSAR Users)

2.4 Get the Run-Time Debugging Tool

S32K3X4EVB-T172 performs better when using the FreeMASTER Run-Time Debugging TOOL.

Note:Check the FreeMASTER page for the latest version.

DOWNLOAD FREEMASTER TOOL

The FreeMASTER communication driver for S32K3 microcontrollers is also needed; download it from the Automotive SW - S32K3 - S32 FreeMASTER link in the S32K3 Standard Software Package.

Open S32DS Extensions and Updates dialog (menu → Help → S32DS Extensions and Updates), click on Add Update Sites link and navigate to FreeMASTER communication driver for S32K3 (zip file starting with "com.") on your disk.

Install FreeMASTER communication driver for S32K3.

Additional optional software may be downloaded from S32K3 Reference Software Package.

完了としてマーク：2.4 Get the Run-Time Debugging Tool

前へOut of the Box

次へPlug It In

3. Plug It In

3.1 Set Up Jumpers in the S32K3X4EVB-T172 Evaluation Board

*Master in the LIN standard document.
Default Jumper settings
Jumper	State	Notes
`J1`	CLOSED	Disabled FS26 watchdog after power-up
`J5`	1-2	Select voltage level for FS26 DEBUG pin
`J8`	CLOSED	External circuits powered from VDD_HV_B domain
`J9`	CLOSED	External circuits powered from VDD_HV_A domain
`J427`	CLOSED	The MCU peripherals powered from the VDD_HV_A domain
`J15`	CLOSED	The MCU peripherals powered from the VDD_HV_B domain
`J18`	1-2	5 V for the VDD_HV_A domain
`J13`	1-2	3.3 V for the VDD_HV_B domain
`J20`	OPEN	LIN1 Commander* mode
`J22`	1-2	5 V from FS26 SBC
`J24`	OPEN	LIN2 Commander* mode
`J26`	CLOSED	3.3 V from FS26 SBC
`J30`	OPEN	FS26 wake inputs
`J31`	1-2	V15 domain powered from FS26 SBC
`J44`	OPEN	On-board debugger UART pins
`J423`	CLOSED	12V from J14 connector
`J424`	CLOSED	Connect 3.3V voltage signal with 3.3V MCU power domain option

完了としてマーク：3.1 Set Up Jumpers in the S32K3X4EVB-T172 Evaluation Board

3.2 Plug in the Power Supply

Switch SW1 to the OFF position (fully to the right).

Connect the 12 V power supply adapter and switch SW1 to the ON position (fully to the left).

When power is applied to the EVB, four orange LED's adjacent to the voltage regulators show the presence of the supply voltages (12 V, 5 V, 3.3 V and 1.5 V).

Note: This power-up procedure ensures that FS26 SBC starts with disabled watchdog.

完了としてマーク：3.2 Plug in the Power Supply

3.3 Connect the Debugger Cable

Connect a micro-USB cable to the J40 connector to debug via the on-board S32K3 debugger.

Or use one of the available JTAG connectors to debug via the external S32K3 debugger.

完了としてマーク：3.3 Connect the Debugger Cable

前へGet Software

次へBuild

4. Build

Let's take your S32K312EVB-T172 evaluation board for a test drive.

4.1 Create a S32DS Project from Example

Open S32DS and from the menu, go to: File → New → S32DS Project from Example. Select one of RTD example codes. You may choose between examples with high-level API or with low-level API. For example: Port_example_K344.