-
KITFS26AEEVM
-
FS26 Safety SBC Evaluation Board.
Kit Contains:
- KITFS26AEEVM Board
- FRDM-KL25Z
- Power Supply Mating Connectors
- USB Mini Cable Type A Male / Type B Male
- アナログ・ツールボックス
- KITFS26AEEVM | FS26 Safety SBC Evaluation Board
FS26 Safety SBC Evaluation Board
KITFS26AEEVM provides easy customer development of the FS26 device family. It's targeting 12 V automotive applications. The tool can be used in a standalone mode and controlled with an USB interface. SPI command is easily controlled by NXP GUI software.
The FS26 family can be evaluated with this board as it is populated with a superset part. The FS26xx part soldered on the board can be fused one time or it is possible to test as many configurations as needed in Emulation mode.
製品詳細
Features
Connectivity
- FRDM-KL25Z MCU plugged allows USB connection for easy connection to software GUI (access to SPI bus, IOs, Safety outputs, Debug, AMUX, regulators) USB connection for register access, OTPemulation and fuse
Power Management
- VBAT power supply connectors (Jack and Phoenix)
- VPRE output 3.3 V to 6.5 V, up to 1.5 A
- VBOOST in Independent mode or in Front-end topology to support battery cranking profiles
- VCORE output 0.8 V to 3.3 V, up to 1.6 A
- LDO1 and LDO2, from 3.3 V or 5.0 V, up to 400 mA
- VTRK1 and VTRK2, from 3.3 V or 5.0 V, up to 150 mA
- VREF accuracy regulator for external ADC reference
General Specifications
- FS0B, FS1b external safety pins
Support
- Debug mode access
- Manual or Automated OTP fuse programming.
- Connectors allowing easy access to digital signals
Components
- LEDs that indicate signal or regulator status
- Analog variable resistor to test external VMON
購入オプション
設計・リソース
デザイン・ファイル
クイック・リファレンス
設計・ファイルの種類.
2 設計・ファイル
-
プリント基板と回路図
KITFS26AEEVM Schematics
-
Design Tool
KITFS26AEEVM Design Files