デザイン・ファイル
1 設計・ファイル
-
プリント基板と回路図
ADAM QFN 6x6 PCB DXF file
- 制御回路
- MMDS09254H
700-1000 MHz Advanced Doherty Alignment Module
MMDS09254H アラートの受信
The MMDS09254H is an integrated module designed for use in base station transmitters in conjunction with high power Doherty amplifiers. The device is designed to enable accurate alignment of phase and amplitude on the carrier and peaking amplifiers to ensure performance consistency, in particular for asymmetric implementations. The MMDS09254H enables superior linearity-efficiency trade-off while improving output power. It contains a 90° coupler, digitally selectable phase shifters and step attenuators, and operates from a single voltage supply. The MMDS09254H is suitable for transmit protocols such as GSM, W-CDMA, UMTS and LTE using frequencies from 700 to 1000 MHz, and is controlled using a serial peripheral interface (SPI).
QFN 6 x 6, 32-Lead Package Image
製品詳細
Features
Key Features
- Frequency: 700-1000 MHz
- Maximum RF Input Power: 25 dBm (CW)
- Low Loss Power Splitter
- 0.5 dB Step Programmable Attenuators with 7.5 dB Maximum Range
- 7° per Bit Phase Shifters with 49° Maximum Range
- Power up into a Selectable State
- Single 5 Volt Supply
- Supply Current: 12 mA
- 50 Ohm Operation (no external matching required)
- TTL/CMOS/SPI Interface (1.8 V, 3.3 V Logic)
- Cost-effective 32-pin, 6 mm QFN Surface Mount Plastic Package
- RoHS compliant
- In Tape and Reel. T1 Suffix = 1000 Units, 16 mm Tape Width, 7-inch Reel
部品番号： MMDS09254H.
設計・リソース
ソフトウェア
3 ソフトウェア・ファイル
-
BSPとデバイスドライバ
External driver used to control amplitude and phase in ADAM devices. Includes MCR.
-
BSPとデバイスドライバ
External driver used to control amplitude and phase in ADAM devices.
-
デバッグと可視化ツール
Freescale SPI adapter software used to control amplitude and phase in ADAM devices. Includes Advanced Doherty Alignment Module User's Guide.
注: より快適にご利用いただくために、ソフトウェアのダウンロードはデスクトップで行うことを推奨します。