USB PD and Type-C Current-Limited Power Switch
NX5P3290UK アラートの受信
The NX5P3290 is a precision adjustable current-limited power switch for USB PD application. The device includes under voltage lockout, over-temperature protection, and reverse current protection circuits to automatically isolate the switch terminals when a fault condition occurs. The 29 V tolerance on VBUS pin ensures the device is able to work on a USB PD port; a current limit input (ILIM) pin defines the over-current limit threshold; an open-drain fault output (FLT) indicates when a fault condition has occurred.
The over-current limit threshold can be programmed from 400 mA to 3.3 A, using an external resistor between the ILIM pin and GND pin. In the over current condition, the device will clamp the output current to the value set by ILIM and keep the switch on while asserting the FLT flag.
To minimize current surges during normal turn on, the device has built in soft start by limiting the power switch turn on slew rate. However, user can disable the soft start and request a fast output by pulling FO pin HIGH.
A fast RCP recovery circuit has been added to the switch to prevent any reverse current flowing back to power source at all times. When exiting from reverse current protection state, the power MOSFET will turn on within 50 us. The fast RCP recovery ensures the voltage on VBUS doesn’t drop too much in a power source swap application.
NX5P3290 is offered in a 2.05 x 2.05 mm, 16 bump WLCSP package.
製品詳細
Key Features
Microcontrollers (MCUs)
- VIN supply voltage range from 4.0 V to 5.5 V
- All time reverse current protection with ultra fast RCP recovery
- Adjustable current limit from 400 mA to 3.3 A
- Clamped current output in over-current condition
- 29 V high voltage tolerance on VBUS pin
- Low ON resistance of the power FETs: 35 mΩ (typical) in total
- Over temperature protection
- Safety approvals
- UL 62368-1, 2nd edition, file no. 20161017-E470128
- IEC 62368-1, 2nd edition, file no. DK-57975-UL
- ESD protection
- IEC61000-4-2 contact discharge exceeds 8 kV on VBUS
- HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV
- CDM AEC standard Q100-01 (JESD22-C101E) exceeds 500 V
- Specified from -40 °C to +85 °C ambient temperature
Product Longevity Program
- This product is included in the NXP Product Longevity Program ensuring a stable supply of products for your embedded designs. The NX5P3290AUK and NX5P3290UK are included in the 10-year program
部品番号： NX5P3290UK.
Target Applications
- Notebook, ultrabook and desktop
- USB PD and Type C port/hubs
- Tablet and smart phone
ドキュメント
クイック・リファレンス ドキュメンテーションの種類.
設計・リソース
エンジニアリング・サービス
NXPから直接サポートを受けるには、以下のサイトをご覧ください。 エンジニアリング・サービス.
1 エンジニアリング・サービス
-
インディペンデントデザインハウス (IDH)
Embedded Software Design
本製品をサポートするパートナーの一覧は、 パートナーマーケットプレイス.