Getting Started with the OM40007

最終更新日時： 2022-12-29 11:20:00サポート OM40007 LPC54018 IoT Module

このドキュメントの内容

1
Get Software
2
AWS IoT
3
Build, Run
4
Learn

Design Resources
Support

お客様の OM40007 LPC54018 IoT Module

このドキュメントの内容

1. Get Software

1.1 Choose a Development Path

NXP MCUXpresso Software Development Kit (SDK) with Amazon FreeRTOS + Integrated Development Enviroment (IDE)
Amazon Web Services + Amazon FreeRTOS + IAR Embedded Workbench

完了としてマーク：1.1 Choose a Development Path

1.2 Jump Start Your Design with the MCUXpresso SDK

The MCUXpresso SDK is complimentary and includes full source code under a permissive open-source license for all hardware abstraction and peripheral driver software.

Click below to download a pre-configured SDK release for the IoT module:

Get MCUXpresso SDK

You can also use the online SDK Builder to create a custom SDK package using the SDK builder.

完了としてマーク：1.2 Jump Start Your Design with the MCUXpresso SDK

1.3 Install Your Toolchain

NXP offers a complimentary toolchain called MCUXpresso IDE.

Get MCUXpresso IDE

Want to use a different toolchain?

No problem! The MCUXpresso SDK includes support for other tools such as IAR , Keil and command-line GCC .

完了としてマーク：1.3 Install Your Toolchain

1.4 Update QCA firmware for latest SDK

The firmware on the Longsys GT1216 module used on the LPC54018 IoT Module requires a manual update to work correctly with MCUXpresso SDK releases starting from SDK 2.4.0. Follow these steps to perform the update.

Update QCA Firmware

Hardware Requirements

Micro-USB Cable
LPC54018-IoT-Module
Debug probe: IoT Module baseboard/LPC-Link2/J-Link probe
Personal Computer with Windows OS

Import the MCUXpresso SDK

Open the MCUXpresso IDE

Select "Installed SDKs" tab within the MCUXpresso IDE window

Open Windows Explorer, and drag and drop the previously downloaded SDK file into the "Installed SDKs" view
Click OK to the confirmation window
The installed SDK will appear in the Installed SDKs view as shown below:

Use the Import SDK example "qca_fwupdate" project from SDK

On the Quickstart Panel, select "Import SDK example(s)"

Select the "lpc54018iotmodule" board and click on Next

In the filter textbox, type "qca". Select the "qca_fwupdate" example project (wifi_qca_examples → qca_fwupdate), and click on "Finish"

Build and download the application to the target board using debugging probe (J-Link or LPC-Link2). Click on the "Debug" button from the Quickstart Panel

Click on "Resume" button or press "F8" to start the application

While the application is running, locate the "host.exe" application and firmware folder at: <sdk_path>\boards\lpc54018iotmodule\wifi_qca_examples\qca_fwupdate\fw\
Open the command line from Windows and execute the host.exe application as follows:
```
host.exe COM30 flashotp_3_3_6.bin 845dd76f5e95 -b115200
```
where:
- COM30 is the LPC54018IoT Module (port J8) CDC Virtual COM Port name
- flashotp_3_3_6.bin is the path to firmware binary
- 845dd76f5e95 is the MAC address of the GT1216 module
- -b115200 is a communication baudrate

Note: The COM port name can be found using the "Windows Device Manager". The MAC address of your WiFi IOE Module can be found in a label on top of the LPC54018IoT Module. The host.exe application cannot resolve COM port with number greater than 99; the Windows control panel may be used to override the COM port number assigned if necessary.

完了としてマーク：1.4 Update QCA firmware for latest SDK

次へAWS IoT

2. AWS IoT

2.1 Create an AWS account

Open the AWS homepage Amazon Web Services and choose to Create a Free Account
Follow the online instructions to create a free account. Part of the sign-up procedure involves:
1. Add payment information, where you will be charged $1.00 USD. No additional charges will apply
2. For account verification, please enter the PIN on your phone when Amazon verification call is received
Wait up to 24 hours for your AWS account to be activated

完了としてマーク：2.1 Create an AWS account

2.2 IAM Policies

Before beginning, you need an IAM user with permission to access AWS IoT and Amazon FreeRTOS. Click below for instructions on how to create a new user with such authorities.

Create an Activate AWS User

Use your AWS root credentials to sign in to the IAM AWS console
In the navigation pane, choose Users and then choose Add user

Type a username, such as Administrator. Select the checkbox next to the "AWS Management Console access", select "custom password", and then type your new password in the text box. Click "Next: Permissions"

Select "Attach existing policies directly" type "AmazonFreeRTOSFullAccess" in the search text box, look for the check box button next to the policy name and click it. Then repeat for "AWSIoTFullAccess", and "AdministratorAccess". Finally choose "Next: Review"

Verify that you have the "AdministratorAccess, AmazonFreeRTOSFullAccess" and "AWSIoTFullAccess" policies attached to your account, then click "Create user"

Sign out from your root account. Sign in using the newly created user account and password by clicking on the link next to Users with AWS Management Console access can sign-in at

完了としてマーク：2.2 IAM Policies

2.3 Create an IoT thing, private key, and certificate for your device

Amazon FreeRTOS - an open-source MCU operating system built on the FreeRTOS kernel, offers developers a universal connection to the Amazon Web Services (AWS) platform.

AWS IoT is an Amazon web service that provides secure, bi-directional communication between Internet-connected devices such as embedded micro-controllers and the AWS Cloud. AWS IoT provides a registry that helps you manage "things". A thing is a representation of a specific device or logical entity (for example, a light bulb, sprinkler, switch, etc). It can be a physical device or sensor.

Now it's time to use the AWS IoT service to create an IoT thing. Click in the button below for a step-by-step guide.

Use the AWS IoT Service and create an IoT Thing

Open a web browser and go to AWS IoT console locate at AWS IoT Console
If this is the first time you access to the AWS IoT console click on "Get started"

In the left navigation pane, choose Secure, and then choose Policies. If you do not have any policies registered in your account, the "You don't have any policies yet" page is displayed. If you see this page, choose to "Create a policy"

Type "myIoTPolicy" in the Name text box to identify your policy. In the "Add statements" section, click "Advanced mode". Modify lines 5, 6, and 7 with the following content:


        {
          "Effect": "Allow",
          "Action": "iot:*",
          "Resource": "*"
        }>

Choose "Create"

In the left navigation pane, choose Manage, and then choose Things. If you do not have any IoT things registered in your account, the "You don't have any things yet" page is displayed. If you see this page, choose "Register a thing". Otherwise, choose to "Create"

On the Creating AWS IoT things page, choose to "Create a single thing"

On the Add your device to the thing registry page, type myShadowThing in the name text box, then click "Next"

On the "Add a certificate for your thing" page, under "One-click certificate creation", choose to "Create certificate"

Download your "private key" and "certificate" by choosing the Download links for each. Choose "Activate" to switch on your certificate. Then click Attach a policy

Select the checkbox next to "myIoTPolicy" and choose "Register Thing"

完了としてマーク：2.3 Create an IoT thing, private key, and certificate for your device

前へGet Software

次へBuild, Run

3. Build, Run

3.1 Import an AWS example project from the MCUXpresso SDK

Use the MCUXpresso IDE to clone an AWS example project.

Import an AWS example project from the MCUXpresso SDK

Open the MCUXpresso IDE
Click Import SDK Example(s) from the QuickStart Panel

Select the "lpc54018iotmodule" board in the Import Wizard. Then, select Next

Type "aws_shadow" into the search bar, and select the "aws_shadow_wifi_qspi_xip" project under aws_examples. Then, click on "Finish"

Verify that project is loaded into the workspace as shown below

完了としてマーク：3.1 Import an AWS example project from the MCUXpresso SDK

3.2 Configure your AWS Credentials to the project

Load your AWS IoT thing's credentials into the project and configure the Wi-Fi parameters.

Configure your AWS credentials to the project

Open the MCUXpresso IDE
Open your previously imported "aws_shadow" example project
Locate the file /amazon-freertos/include/aws_clientcredential.h and configure:
- Broker endpoint (Copy the URL from AWS IoT → 'myShadowThing' → Interact)
- Thing name ('myShadowThing')
- Wi-Fi SSID
- Wi-Fi Password

From the SDK folder, locate the "Certificate Configurator" in the following path:

/SDK_2.3.0_LPC54018-IoT-Module/rtos/amazon-freertos/demos/common/devmode_key_provisioning/CertificateConfigurationTool/CertificateConfigurator.html

Note: You can locate your SDK_2.3.0_LPC54018-IoT-Module.zip file by right-clicking on your "Installed SDK" item and click on "Open Location".

Open the "Certificate Configurator" file; this tool will generate a "aws_clientcredential_keys.h" header file, based on the certificate files you previously downloaded

Browse to the Certificate and Key files you previously downloaded from your 'Thing' (myShadowThing) and click on "Generate and save aws_clientcredential_keys.h"

Note: If no file is downloaded, allow blocked content in the explorer.

Copy the newly generated "aws_clientcredential_keys.h" and replace the one from your aws shadow project. The file is located at: /lpc54018iotmodule_aws_examples_aws_shadow_wifi_qspi_xip\amazon-freertos\include

完了としてマーク：3.2 Configure your AWS Credentials to the project

3.3 Build your Application

Build your AWS IoT Shadow application using MCUXpresso IDE.

Build and Run your application

Open the MCUXpresso IDE
Open your previously imported "aws_shadow" example project
Select the project folder and click on "Build"

Wait until the project is built

Verify the build finished without any errors

完了としてマーク：3.3 Build your Application

3.4 Connect a Debugger probe

Connect a debugger probe to your LPC54018 IoT Module.

Connect a Debugger probe | LPC-Link2

Connect a LPC-Link2 debug probe to your LPC54018-IoT Module, make sure the cable connects as shown below

Connect a Debugger probe | JLink

Download and install the latest J-Link Software from here
Connect a J-Link debug probe to your LPC54018-IoT Module, make sure the cable connects as shown below

完了としてマーク：3.4 Connect a Debugger probe

3.5 Download and Run your application

Download and run your AWS IoT Shadow application into the LPC54018 IoT Module.

Download and Run your Application | JLink

Connect the LPC54018 IoT Module to your PC using a micro-USB cable

Program your LPC54018 IoT Module by clicking on "Debug "lpc54018iotmodule_aws_examples_aws_shadow_wifi_qspi_xip" from the "Quickstart Panel"

Select your debugger probe (LPC-Link2 or J-Link) and click "OK" to start programming your board
Wait until the program is successfully downloaded
Click "Run" to execute the application in debug mode

Note: If the debugger did not stop in the main() function, press the "Restart" button in the debugger and then press "Run" again.

Open the "Device Manager" on your Windows PC

Note: if the IoT Module doesn't enumerate as a COM port try browsing for the driver at <SDK_PATH>\boards\lpc54018iotmodule\usb_examples\usb_device_cdc_vcom\inf.

Open a Terminal emulator software (TeraTerm, PuTTY or similar) and connect to the COM port using any settings (it's an USB-Virtual COM port)

Note: The terminal will only run when the software is running. Stop, reset or halt will disable USB CDC.

Verify that the Shadow of your thing is being updated in AWS IoT

完了としてマーク：3.5 Download and Run your application

3.6 Success

You will see your Thing's shadow being updated. Confirm communication to AWS IoT using the Terminal.

完了としてマーク：3.6 Success

前へAWS IoT

次へLearn

4. Learn

4.1 More AWS examples projects

Import the "aws_led_wifi" example project, then follow the readme instructions located at {SDK_LOC}/board/lpc54018iotmodule/aws_examples/

Download Demo application integrating AWS and NXP components with Alexa from BlueWind Git .

完了としてマーク：4.1 More AWS examples projects

前へBuild, Run

次へDesign Resources

Design Resources

Additional Resources

Amazon Links of Interest

前へLearn

次へSupport

Support

Forums

Connect with other engineers and get expert advice on designing with Kinetis MCUs and MCUXpresso Software and Tools. Join the community discussion in one of our two dedicated communities:

前へDesign Resources

このページ

4.1
More AWS examples projects

Forums

Getting Started with the OM40007

このドキュメントの内容

お客様の OM40007 LPC54018 IoT Module

1. Get Software

1.1 Choose a Development Path

1.2 Jump Start Your Design with the MCUXpresso SDK

1.3 Install Your Toolchain

Want to use a different toolchain?

1.4 Update QCA firmware for latest SDK

Hardware Requirements

Import the MCUXpresso SDK

Use the Import SDK example "qca_fwupdate" project from SDK

2. AWS IoT

2.1 Create an AWS account

2.2 IAM Policies

2.3 Create an IoT thing, private key, and certificate for your device

3. Build, Run

3.1 Import an AWS example project from the MCUXpresso SDK

3.2 Configure your AWS Credentials to the project

3.3 Build your Application

3.4 Connect a Debugger probe

3.5 Download and Run your application

3.6 Success

4. Learn

4.1 More AWS examples projects

Design Resources

Chip Documents

Board Information

Software

Additional Resources

Amazon Links of Interest

Support

Forums

このページ