QuadSPI Default Configurations

For S32G274A_Rev2, S32R45 and S32G399A processors, QuadSPI tool contains several default boot images configurations, depending on the flash type, clock frequency and mode. The path where these files can be found is: mcu_data -> processors -> <processor name> -> <SDK version> -> quadspi -> default_boot_images

The following tables describes the QuadSPI configuration for each binary file:

Table 1. S32G274A_Rev2/S32G399A
QuadSPI boot image Flash Manufacturer Flash Part Clock Frequency Mode Bus Width
mx25_sim133ddr.bin Macronix MX25UW51245G 133 MHz DDR Octal
mx25_sim133sdr.bin Macronix MX25UW51245G 133 MHz SDR Octal
mx25_sim200ddr.bin Macronix MX25UW51245G 200 MHz DDR Octal
mx66_sim133ddr.bin Macronix MX66UM1G45G 133 MHz DDR Octal
mx66_sim133sdr.bin Macronix MX66UM1G45G 133 MHz SDR Octal
Table 2. S32R45
QuadSPI boot image Flash Manufacturer Flash Part Clock Frequency Mode Bus Width
mx25_sim100ddr.bin Macronix MX25UW51245G 100 MHz DDR Octal
mx25_sim133ddr.bin Macronix MX25UW51245G 133 MHz DDR Octal
mx25_sim133sdr.bin Macronix MX25UW51245G 133 MHz SDR Octal

Disclaimers:

  1. The images have been tested on limited samples under laboratory settings, and they are provided as-is, without any warranty whatsoever, and are intended only for development purposes.
  2. Customer must perform necessary qualification across process, temperature and voltage conditions before using these images for production.