Overview
========
This example demonstrates the SDK Peripheral drivers working with different methods.

This example demonstrates use of smartcard driver API to read GSM sim card ICC-ID (Integrated circuit card identifier,
which should be placed on the card). 
Please be aware, that this example is just simple demonstration of smartcard driver API. It may not work with all types
of GSM sim cards.


Toolchain supported
===================
- IAR embedded Workbench 7.50.1
- Keil MDK 5.17
- GCC ARM Embedded 2015-4.9-q3
- Kinetis Development Studio IDE 3.0.0
- Atollic TrueSTUDIO 5.4.0

Hardware requirements
=====================
- Mini/micro USB cable
- TWR-K80F150M board
- Personal Computer
- GSM sim card

Board settings
==============
This example project does not call for any special hardware configurations.
Although not required, the recommendation is to leave the development board's jumper settings
and configurations in default state when running this example.

Prepare the Demo
================
Connect a serial cable from the debug UART port of the board to the PC. Start Tera Term
(http://ttssh2.osdn.jp) and make a connection to the virtual serial port.

1. Start Tera Term
2. New connection -> Serial
3. Set appropriate COMx port (x is port number) in Port context menu. Number is provided by operation
   system and could be different from computer to computer. Select COM number related to virtual
   serial port. Confirm selected port by OK button.
4. Set following connection parameters in menu Setup->Serial port...
        Baud rate:    115200
        Data:         8
        Parity:       none
        Stop:         1
        Flow control: one
5.  Confirm selected parameters by OK button.


Running the demo
================

***** SMARTCARD Driver Send Receive functionality example *****

Card inserted.
Deactivating card...Done!
Resetting/Activating card...Done!
Selecting Master root file.
Getting response of selection command.
Selecting ICC-ID file.
Reading binary ICC-ID.
Received smartcard ICC-IC: 000000000000000000

Send receive functionality example finished!
~~~~~~~~~~~~~~~~~~~~~

Customization options
=====================


