                    Updating the dBUG ROM Monitor

The easiest way to update your dBUG ROM Monitor is to make use of a 
Flash programmer (such as P&E's PROGCFW ColdFire Programmer, SDS 
SingleStep, EST visionClick, etc.):

Update via a Flash programmer

  Files needed:
  M5307C3_dbug.s19

  Use a Flash programmer to download this s-record to the AMD29LV004 Flash
  devices (8bit x 2 devices) of your M5307C3 board.  The base address of
  the Flash is 0xFFE00000.

Files in this Archive:

*.dwn -- S-Record Format
*.s19 -- S-Record Format
*.elf -- ELF Format

     Name            Downloads To  Executes From    Method of Use

M5307C3_dbug.s19      0xFFE00000    0xFFE00000      BDM Programmer
M5307C3_dbug.dwn      0xFFE00000    0xFFE00000      BDM Programmer
M5307C3_dbug2.dwn     0x00020000    0xFFE00000      updbug command
M5307C3_dbug3.dwn     0x00020000    0xFFE20000      upuser command      
M5307C3_dbug4.dwn     0x00000000    0x00000000      executes in RAM
M5307C3_dbug2.elf     0x00020000    0xFFE00000      updbug command
M5307C3_dbug3.elf     0x00020000    0xFFE20000      upuser command
M5307C3_dbug4.elf     0x00000000    0x00000000      executes in RAM
