ハードウェア
3 ハードウェア提供
-
エミュレータ、プローブ、プログラマMCU-Link Debug Probe
-
エミュレータ、プローブ、プログラマMCU-Link Pro Debug Probe
-
評価・開発ボードLPCXpresso55S36開発ボード
MCU-Link Debug Probe Architecture
MCU-LINK-ARCHITECTURE アラートの受信
MCU-Link is the NXP single, unified debug probe architecture for all NXP general-purpose Arm® Cortex-M® based MCUs. MCU-Link is implemented on NXP´s latest evaluation boards (known as MCU-Link OB) and standalone versions (MCU-Link and MCU-Link Pro) are available for use with any system with a supported target MCU. MCU-Link uses common firmware images for all implementations, with strap pins used to define the target type and supported features. MCU-Link is based on the LPC55S69 microcontroller to provide high-performance debug over high-speed USB.
MCU-Link requires MCUXpresso IDE or MCUXpresso for VS Code to fully utilize all available features, but can also be used with third-party IDEs. MCU-Link can also provide USB to UART, SPI and/or I2C interfaces (depending on MCU-Link type/implementation), a feature supported by the NXP open source LIBUSBSIO host library for Windows, MacOS and Linux. MCU-Link is also compatible with the MCUXpresso SEC tools and FreeMASTER.
A free utility from NXP, also included with the LinkServer package, provides an easy way to install firmware updates.
ソフトウェア詳細
Features
Microcontrollers (MCU)
- LPC55S69 dual Arm Cortex M33 MCU running at 150MHz
Debug
- Easy firmware update using free utilities
- CMSIS-DAP based firmware (required for bridge and power measurement)
- J-Link firmware option (Pro and OB versions)
- SWD target debug
- SWO trace/profiling I/O support
- Current measurement down to sub 200 nA resolution (implementation dependent)
- Analog signal monitor input (1.2 V to 3.6 V) (implementation dependent)
- Option to power target system (1.8 V or 3.3V, up to 400 mA) (MCU-Link Pro)
- Supports target debug for systems running from 1.2 V to 5 V
Host Interfaces
- High-speed USB host interface
- USB to UART (VCOM) bridge with optional second VCOM
- USB to I2C and SPI bridging (implementation dependent)
- USB to GPIO bridge option (implementation dependent)
User Interface
- Status/breathing LED to easily check probe is operational
- Multiple status LEDs for ease of use (implementation dependent)
Supported IDEs
- Compatible with MCUXpresso IDE
- Compatible with tools/IDEs that support CMSIS-DAP or J-Link protocol
- Compatible with MCUXpresso for VS Code
Host Support
- Ubuntu 20.04.2 LTS / 22.04 LTS
- MacOS 11.x Big Sur, 12.x Monterey
- Microsoft® Windows 10 and 11
システム要件
- It is recommended the MCU-Link probes are used with the latest available MCUXpresso IDE releases, but can be used with version 11.3 onwards
- MCU-Link probes may be used with 3rd party IDEs (such as IAR Embedded Workbench and Keil Studio). See product documentation from those vendors for more information
- When using MCUXpresso IDE, MCU-Link firmware version 3.xxx and newer uses WinUSB, and requires MCUXpresso IDE version 11.7 or later
ダウンロード
1 ダウンロード
-
ソフトウェア開発リソース
MCU-Link installer for Linux (v2.263)
注: より快適にご利用いただくために、ソフトウェアのダウンロードはデスクトップで行うことを推奨します。
設計・リソース
関連ソフトウェア
1-5 の 6 ソフトウェア・ファイル
-
デバッグと可視化ツール
LIBUSBSIO Host Library for USB Enabled MCUs
-
デバッグと可視化ツール
マイクロコントローラ用Linkserver
-
デバッグと可視化ツール
FreeMASTERランタイム・デバッグ・ツール
-
開発IDEと構築ツール
MCUXpresso統合開発環境 (IDE)
-
ソフトウェア開発リソース
Secure Provisioning SDK (SPSDK)
注: より快適にご利用いただくために、ソフトウェアのダウンロードはデスクトップで行うことを推奨します。